Port-Naming Conventions; Port Licensing - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

About On-Demand Port Activation Licensing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Port-Naming Conventions

Table 11-1
Table 11-1
Cisco MDS 9124
Switch
fc1/1 through fc1/24 fc1/1 through fc1/34 Internal ports: bay1

Port Licensing

On the Cisco MDS 9124 Switch, the first eight ports are licensed by default. You are not required to
perform any tasks beyond the default configuration unless you prefer to immediately activate additional
ports, make ports ineligible, or move port licenses.
Figure 11-1
Figure 11-1
If you need additional connectivity, you can activate additional ports in 8-port increments with each
on-demand port activation license, up to a total of 24 ports.
On the Cisco MDS 9134 Switch, the first 24 ports that can operate at 1 Gbps, 2 Gbps, or 4 Gbps are
licensed by default. If you need additional connectivity, you can activate the remaining eight ports with
one on-demand port activation license. A separate 10G license file is required to activate the remaining
two 10-Gbps ports.
Figure 11-2
Figure 11-2
Figure 11-3
c-Class BladeSystem.
Cisco MDS 9000 Family CLI Configuration Guide
11-2
describes the port-naming conventions for the four Cisco Fabric switches.
Port-Naming Conventions for Cisco Fabric Switches
Cisco MDS 9134
Switch
shows the ports that are licensed by default for the Cisco MDS 9124 Switch.
Cisco MDS 9124 Switch Default Port Licenses (fc1/1 - fc1/8)
shows the ports that are licensed by default for the Cisco MDS 9134 Switch.
Cisco MDS 9134 Switch Default Port Licenses (fc1/1 - fc1/24)
shows the external ports that are licensed by default for the Cisco Fabric Switch for HP
Chapter 11
Cisco Fabric Switch for HP
c-Class BladeSystem
through bay16
External ports: ext1
through ext8
OL-16184-01, Cisco MDS SAN-OS Release 3.x
On-Demand Port Activation Licensing
Cisco Fabric Switch for
IBM BladeCenter
Internal ports: bay1
through bay14
External ports: ext0 and
ext15 through ext19