HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 560

Manual IVR Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 29-7
IVR-Enabled
MDS switch
Note If two VSANs in an IVR topology have the same VSAN ID and different AFIDs, they count as two
VSANs for the 128-VSAN limit for IVR.
The use of a single AFID does not allow for segmented VSANs in an inter-VSAN routing topology.
Note
You can only configure a maximum of 128 IVR-enabled switches and 128 distinct VSANs in an IVR
Caution
topology (see the
To create the IVR topology using Fabric Manager, follow these steps:
Expand All VSANs and then select IVR in the Logical Domains pane.
Step 1
You see the IVR configuration in the Information pane.
Figure 29-8
Click the Local Topology tab to display the existing IVR topology.
Step 2
Step 3 Click the Create Row icon to create rows in the IVR topology (see
Step 4 Select the switch, switch WWN, and a comma-separated list of VSAN IDs for this topology.
Step 5 Click Create to create this new row.
Step 6 Click the Apply Changes icon to create the IVR topology.
Cisco MDS 9000 Family CLI Configuration Guide
29-16
Example IVR Topology with Non-Unique VSAN IDs Using AFIDs
VSAN 10
AF ID 2
VSAN 5
Transit VSAN
"Database Merge Guidelines" section on page
Local Topology Tab
Chapter 29
VSAN 10
AF ID 5
IVR-Enabled
MDS switch
29-31).
Figure 29-8).
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Configuring Inter-VSAN Routing