Removing A Feature From A Region; Deleting Cfs Regions - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 13 Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 13-7
Step 3 Double-click the RegionId cell in the required row.
The cursor blinks in the cell prompting a change in the value.
Step 4 Change the RegionId value to the required region.
Step 5 Click the Apply Changes button on the tool bar to commit the change.

Removing a Feature from a Region

To remove a feature from a region using Fabric Manager, follow these steps:
Click the Feature by Region tab and select the required row.
Step 1
Click the Delete Row button on the toolbar.
Step 2
Figure 13-8
Figure 13-8
Step 3 Click Yes to confirm row deletion from the table in view.

Deleting CFS Regions

To delete an entire region, follow these steps:
Click the All Regions tab and select the required row.
Step 1
Click Delete Row.
Step 2
This action removes all entries pertaining to that switch and region in the table under Feature by Region
tab.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Feature by Region Tab
shows a confirmation dialog box.
Removing a Feature from a Region
Cisco MDS 9000 Family CLI Configuration Guide
CFS Regions
13-15