Default Settings - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 27 SAN Device Virtualization
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Caution There must be at least one SDV-enabled switch that is not a Cisco MDS 9124 Switch between the server
and the device that are being virtualized. In other words, SDV does not work when initiators and primary
devices are connected to the same Cisco MDS 9124 Switch.

Default Settings

Table 27-1
Table 27-1
Parameters
enable
OL-16184-01, Cisco MDS SAN-OS Release 3.x
lists the default settings for SDV parameters.
Default SDV Configuration Parameters
Default
disabled
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
27-9