Configuring Ivr Logging Levels - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 29 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click the Create Row icon to create an FC ID (see
Step 3
Select the switch for which you are configuring the virtual FC ID to be used to represent a device in a
Step 4
specific VSAN (current VSAN).
Enter the current fabrc in the Current Fabric ID field for the fcdomain database.
Step 5
Enter the current VSAN in the Current VSAN ID field for the fcdomain database.
Step 6
Enter the pWWN.
Step 7
Click the drop-down menu to select the FC ID to map to the pWWN you selected.
Step 8
Click Create to create this new row.
Step 9

Configuring IVR Logging Levels

To configure the severity level for logging messages from the IVR feature using Fabric Manager, follow
these steps:
Step 1 Expand Switches > Events and then select Syslog from the Physical Attributes pane.
Step 2 Click the Severity Levels tab.
Step 3 Click the Facility column header to sort the table by facility name.
Step 4 Select the severity level at which the IVR logs system messages from the Severity drop-down menu (see
Figure
Figure 29-13
Tip
Step 5 Click the Apply Changes icon to save these changes locally.
.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
29-13).
Syslog Severity Drop-Down Menu
Setting the severity to warning means that all IVR messages at the warning level or above will
be logged to Fabric Manager.
Figure 29-12).
Cisco MDS 9000 Family CLI Configuration Guide
Manual IVR Configuration
29-21