Portchannel Configuration Verification; Default Settings - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

PortChannel Configuration Verification

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 23-16
Step 2 Check the Persist check box for each channel that you want to convert to a manually configured channel
group.
Step 3 Click the Apply Changes icon to save any modifications.
PortChannel Configuration Verification
You can use the Information pane in Fabric Manager to verify your PortChannel Configuration (see
Figure
Figure 23-17

Default Settings

Table 23-3
Table 23-3
Parameters
PortChannels
Create PortChannel
Cisco MDS 9000 Family CLI Configuration Guide
23-20
Switch Protocols
23-17).
PortChannel Summary in Fabric Manager
lists the default settings for PortChannels.
Default PortChannel Parameters
Chapter 23
Default
FSPF is enabled by default.
Administratively up.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Configuring PortChannels