Default Settings - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 22 Configuring Generation 2 Switches and Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 22-14
Step 2 Click Refresh to view the latest diagnostic information.

Default Settings

Table 22-16
Table 22-16
Parameter
Speed mode
Rate mode
Port mode
BB_credit
buffers
Performance
buffers
1. Auto speed mode on the 4-Gbps switching modules negotiates 1, 2, and 4 Gbps.
2. The 4-port 10-Gbps switching module only supports 10-Gbps traffic.
3. Auto port mode on the 12-port 4-Gbps switching module interfaces can operate in E port mode, TE port mode, and Fx port
4. Auto port mode on the 4-port 10-Gbps switching module interfaces can operate in E port mode, TE port mode, and F port
5. Performance buffers are shared among all ports on the module.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Diagnostics Tab for Selected Port
lists the default settings for Generation 2 interface parameters.
Default Generation 2 Interface Parameters
Default
48-Port 4-Gbps
Switching Module
1
auto
shared
Fx
16
–
mode.
mode.
24-Port 4-Gbps 12-Port 4-Gbps
Switching Module Switching Module
1
auto auto
shared dedicated
3
Fx auto
16 250
5
– 145
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
4-Port 10-Gbps
Switching Module
1 2
auto
dedicated
4
auto
250
5
145
22-31