HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 246

Licensing Model
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The Cisco MDS 9216i switch enables SAN extension features on the two fixed IP services ports only.
Note
The features enabled on these ports are identical to the features enabled by the SAN extension over IP
license on the 14/2-port Multiprotocol Services (MPS-14/2) module. If you install a module with IP
ports in the empty slot on the Cisco MDS 9216i, a separate SAN extension over IP license is required to
enable related features, such as FCIP, on the IP ports of the additional module.
Table 10-1
Feature License
Enterprise package
(ENTERPRISE_PKG)
Cisco MDS 9000 Family CLI Configuration Guide
10-4
Feature-Based Licenses
Chapter 10
Features
• Enhanced security features:
LUN zoning
–
Read-only zones
–
FC Port security
•
VSAN-based access control
•
Fibre Channel Security Protocol (FC-SP)
•
authentication
Advanced traffic engineering—quality of service
•
(QoS)
IP security (IPsec) protocol for iSCSI and FCIP
•
using the MPS-14/2 module or Cisco MDS 9216i
switch
• IPsec & IKE for IPv4
• IKE digital certificates
• Extended credits using the MPS-14/2 module or the
Cisco MDS 9216i Switch
• Enhanced VSAN routing—inter-VSAN routing
(IVR) over Fibre Channel
• IVR Network Address Translation (NAT) over
Fibre Channel
• Zone-based traffic prioritizing
• Zone-based FC QoS
• Extended BB_Credits
• Fibre Channel write acceleration
• SCSI flow statistics
FCIP encryption
•
Fabric binding for Fibre Channel
•
SAN device virtualization
•
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Obtaining and Installing Licenses