HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 950

Using the FCIP Wizard
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 48-13
Step 9 Check the Write Acceleration check box to enable FCIP write acceleration on this FCIP link.
See the
Step 10 Check the Enable Optimum Compression check box to enable IP compression on this FCIP link.
See the
Click Next.
Step 11
Set the Port VSAN and click the Trunk Mode radio button for this FCIP link, (see
Step 12
Note
Cisco MDS 9000 Family CLI Configuration Guide
48-12
Specifying Tunnel Properties
"FCIP Write Acceleration" section on page
"FCIP Compression" section on page
If FICON is enabled/FICON VSAN is present on both the switches, the
displayed, otherwise Figure 48-25
48-29.
48-37.
is displayed.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 48 Configuring FCIP
Figure 48-14).
Figure 48-26 is