HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 405

Chapter 21 Configuring N Port Virtualization
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 21-5
Before the wizard starts, Fabric Manager checks if there are any NPV and NPIV capable switches from
the client's SAN. An NPV-capable switch has to be a Cisco MDS 9124, 9134, a HP Blade Server, or an
IBM Blade Server with SAN-OS version 3.2.2 and later. An NPIV capable switch has to be Cisco switch
with SAN-OS 3.0.1 and later. If there are no NPV-capable switches, FM displays an error message.
(See
Figure 21-6
Step 2 Select the NPV devices as shown in
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Launching NPV Setup Wizard
Figure 21-6.)
Error in Launching
Figure 21-7.
Cisco MDS 9000 Family CLI Configuration Guide
Configuring NPV
21-7