Activating A Zone Set - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 30 Configuring and Managing Zones
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Activating a Zone Set

Changes to a zone set do not take effect in a full zone set until you activate it.
To activate an existing zone set using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Click Activate to activate the zone set.
You see the pre-activation check dialog box shown in
Figure 30-16
Step 4 Click Yes to review the differences.
You see the Local vs. Active Differences dialog box shown in
Figure 30-17
Click Close to close the dialog box.
Step 5
You see the Save Configuration dialog box shown in
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Pre-Activation Check Dialog Box
Local vs Active Differences Dialog Box
Figure 30-16.
Figure 30-17.
Figure 30-18.
Cisco MDS 9000 Family CLI Configuration Guide
Zone Sets
30-17