Configuring Perfect Forward Secrecy - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 44 Configuring IPsec Network Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Configuring Perfect Forward Secrecy

To configure the PFS value using Fabric Manager, follow these steps:
Expand Switches > Security and then select IPSEC in the Physical Attributes pane.
Step 1
You see the IPsec configuration in the Information pane (see
Figure 44-30
Choose the CryptoMap Set Entry tab.
Step 2
You see the existing crypto maps configured in
Figure 44-31
Step 3 Click the drop-down list in the PFS column and select the appropriate value.
Step 4 Click Apply Changes to save your changes.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
IPsec Configuration
Existing Crypto Maps
Figure 44-30).
Figure 44-31.
Cisco MDS 9000 Family CLI Configuration Guide
Crypto IPv4-ACLs
44-35