HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 462

PortChannel Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 23-11
If you did not choose to dynamically form a PortChannel, you see the third PortChannel Wizard dialog
Step 8
box(see
Figure 23-12
Step 9 Change the channel ID or description for each switch, if necessary.
Step 10 Review the attributes at the bottom of the screen, and set them if applicable.
Cisco MDS 9000 Family CLI Configuration Guide
23-10
Dynamically Form a PortChannel
Figure 23-12).
Create a PortChannel
Chapter 23 Configuring PortChannels
OL-16184-01, Cisco MDS SAN-OS Release 3.x