Recovering An Ivr Full Topology - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 29 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Choose Edit > Copy Full Zone Database.
Step 2
You see the Copy Full Zone Database dialog box shown in
Figure 29-23
Choose either Active or Full, depending on which type of IVR database you want to copy.
Step 3
Select the source switch from which to copy the information from the drop-down list.
Step 4
Select the destination switch from the drop-down list.
Step 5
Click Copy to copy the database.
Step 6

Recovering an IVR Full Topology

You can recover a topology by copying from the active zone database or the full zone database.
To recover a zone topology using Fabric Manager, follow these steps:
Choose Zone > IVR > Edit Local Full Zone Database.
Step 1
You see the Edit IVR Local Full Zone Database dialog box.
Choose Edit > Copy Full Topology.
Step 2
You see the Copy Full Topology dialog box shown in
Figure 29-24
Choose either Active or Full, depending on which type of IVR database you want to copy from.
Step 3
Select the source switch from which to copy the information from the drop-down list.
Step 4
Select the destination switch from the drop-down list.
Step 5
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Copy Full Zone Database Dialog Box
Copy Full Topology Dialog Box
IVR Zones and IVR Zone Sets
Figure 29-23.
Figure 29-24.
Cisco MDS 9000 Family CLI Configuration Guide
29-29