Default Settings, Page 57-7About Santap - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring SANTap
SANTap is one of the Intelligent Storage Services features supported on the Storage Services Module
(SSM). The Storage Services Module (SSM) supports SANTap in Cisco MDS SAN-OS Release 2.0(2b)
and later.
For licensing details, see
This chapter includes the following sections:
•
•
Default Settings, page 57-7
The SANTap feature allows third-party data storage applications, such as long distance replication and
continuous backup, to be integrated into the SAN. The protocol-based interface that is offered by
SANTap allows easy and rapid integration of the data storage service application because it delivers a
loose connection between the application and an SSM, which reduces the effort needed to integrate
applications with the core services being offered by the SSM. See
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 10, "Obtaining and Installing Licenses."
Default Settings, page 57-7About SANTap, page 57-1
Configuring SANTap, page 57-3
About SANTap
57
C H A P T E R
Figure 57-1.
Cisco MDS 9000 Family CLI Configuration Guide
57-1