About Snmp Security - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring SNMP
The CLI and SNMP use common roles in all switches in the Cisco MDS 9000 Family. You can use
SNMP to modify a role that was created using the CLI and vice versa.
Users, passwords, and roles for all CLI and SNMP users are the same. A user configured through the
CLI can access the switch using SNMP (for example, the Fabric Manager or the Device Manager) and
vice versa.
This chapter includes the following sections:
•
•
•
•
•

About SNMP Security

SNMP is an application layer protocol that facilitates the exchange of management information between
network devices. In all Cisco MDS 9000 Family switches, three SNMP versions are available: SNMPv1,
SNMPv2c, and SNMPv3 (see
Figure 40-1
Switch 1
This section includes the following topics:
OL-16184-01, Cisco MDS SAN-OS Release 3.x
About SNMP Security, page 40-1
SNMPv3 CLI User Management and AAA Integration, page 40-2
Creating and Modifying Users, page 40-4
SNMP Trap and Inform Notifications, page 40-8
Default Settings, page 40-12
SNMP Security
SNMP v1 or v2c
(network operator level)
SNMP request
SNMP response
(response depends on successful authentication)
C H A P T E R
Figure 40-1).
Cisco MDS 9000 Family CLI Configuration Guide
40
GET or SET
SNMP commands
40-1