Configuring Aaa Information; Adding And Removing Users - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 7 Fabric Manager Web Server
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Check the check box next to the community you want to remove and click Remove.
Step 3
Note Cisco Fabric Manager 3.0(1) does not require you to make changes to the communities.properties file
even if you are using a Cisco MDS 9020 switch or any third party devices.

Configuring AAA Information

To configure Fabric Manager Server preferences, click Admin > Configure > FMS Users > AAA and
follow the instructions on the screen.

Adding and Removing Users

You can use Fabric Manager Web Server to add and remove Web Server users.
To add a user using Fabric Manager Web Server, follow these steps:
Choose Admin > Configure.
Step 1
Click Local Database in the left navigation pane.
Step 2
You see the Local Database page shown in
Figure 7-38
Step 3 Click Add.
You see the Add User dialog box shown in
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Local Database Page
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Figure 7-38.
Figure 7-39.
Admin
7-43