Chapter 50
Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Choose End Devices > iSNS.
Step 1
You see the iSNS configuration in the Information pane.
Click the Cloud Discovery tab and check the Manual Discovery check box.
Step 2
Click the Apply Changes icon to save this change.
Step 3
Configuring Automatic iSNS Cloud Discovery
To configure automatic iSNS cloud discovery using Fabric Manager, follow these steps:
Choose End Devices > iSNS.
Step 1
You see the iSNS configuration in the Information pane.
Click the Cloud Discovery tab and check the AutoDiscovery check box.
Step 2
Click the Apply Changes icon to save this change.
Step 3
Configuring iSNS Cloud Discovery Distribution
To configure iSNS cloud discovery CFS distribution using Fabric Manager, follow these steps:
Step 1
Choose End Devices > iSNS.
You see the iSNS configuration in the Information pane.
Step 2
Click the CFS tab and select enable from the Admin drop-down menu for the cloud discovery feature.
Select enable from the Global drop-down menu for the cloud discovery feature.
Step 3
Click the Apply Changes icon to save this change.
Step 4
Default Settings
Table 50-2
Table 50-2
Parameters
Number of TCP connections
minimum-retransmit-time
keepalive-timeout
max-retransmissions
PMTU discovery
pmtu-enable reset-timeout
OL-16184-01, Cisco MDS SAN-OS Release 3.x
lists the default settings for iSCSI parameters.
Default iSCSI Parameters
Default
One per iSCSI session.
300 msec.
60 seconds.
4 retransmissions.
Enabled.
3600 sec.
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
50-75