Chapter 19
Managing Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 19-9
Parameters
Administrative connection
Global switch information
System clock
In-band (VSAN 1) interface
Table 19-10
Table 19-10
Parameters
Initial state when installed
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Default Supervisor Module Settings
Default
Serial connection.
•
•
•
No value for system clock time.
IP address, subnet mask, and broadcast address assigned to the
VSAN are set to 0.0.0.0.
lists the default settings for the SSM.
Default SSM Settings
Default
•
•
No value for system name.
No value for system contact.
No value for location.
Power-down state on switches with Cisco MDS SAN-OS
Release 2.1(1a) and earlier installed.
Fibre Channel switching mode on switches with Cisco MDS
SAN-OS Release 2.1(2) and later installed and SSMs with
EPLD version 2.0(2) and later installed.
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
19-13