Chapter 46
Configuring Port Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click Finish to complete the Port Security Configuration for the selected switch.
Step 11
Enabling Port Security
By default, the port security feature is disabled in all switches in the Cisco MDS 9000 Family.
To enable port security using Fabric Manager, follow these steps:
Expand a VSAN and then select Port Security in the Logical Domains pane.
Step 1
You see the port security configuration for that VSAN in the Information pane (see
To enable port security using Fabric Manager, follow these steps:
Step 1
Expand a VSAN and then select Port Security in the Logical Domains pane.
You see the port security configuration for that VSAN in the Information pane (see
Figure 46-6
Click the CFS tab.
Step 2
You see the information show in
Figure 46-7
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Port Security Configuration
Figure
46-7.
Port Security CFS
Cisco MDS 9000 Family CLI Configuration Guide
Enabling Port Security
Figure
46-6).
Figure
46-6).
46-9