HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 407

Chapter 21 Configuring N Port Virtualization
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 21-8
Step 3 Select the NPIV core switches as shown in
Figure 21-9
Check the check boxes to select the required NPIV core switches. The table lists all the available NPIV
core switches including the core switches that have not yet enabled the NPIV feature. The NPIV core
switches which are not NPIV enabled, this wizard will enable NPIV on them in the final step.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Warning to Enable NPV Feature on NPV-Capable Switches
Selecting the NPIV Core Switches
Figure 21-9.
Cisco MDS 9000 Family CLI Configuration Guide
Configuring NPV
21-9