About Contiguous Domain Id Assignments; Enabling Contiguous Domain Id Assignments - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 25 Configuring Domain Parameters
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

About Contiguous Domain ID Assignments

By default, the contiguous domain assignment is disabled. When a subordinate switch requests the
principal switch for two or more domains and the domains are not contiguous, the following cases apply:
•
•

Enabling Contiguous Domain ID Assignments

OL-16184-01, Cisco MDS SAN-OS Release 3.x
If the contiguous domain assignment is enabled in the principal switch, the principal switch locates
contiguous domains and assigns them to the subordinate switches. If contiguous domains are not
available, the SAN-OS software rejects this request.
If the contiguous domain assignment is disabled in the principal switch, the principal switch assigns
the available domains to the subordinate switch.
Cisco MDS 9000 Family CLI Configuration Guide
Domain IDs
25-15