Recovering A Web Server Password; Starting, Restarting, And Stopping Services - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 7 Fabric Manager Web Server
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Recovering a Web Server Password

Fabric Manager Web Server user passwords are encrypted and stored locally on the workstation where
you installed Web Server. If you forget a password, you can create a new network-admin user locally on
the workstation where you installed Web Server and then log in and delete the old user account under
the Admin tab.
To create a user on the workstation where you installed Web Server and delete the old user, follow these
steps:
Step 1 Go to the Web Server installation directory and cd to the bin directory.
Step 2 Enter the following line to create a user:
addUser.{sh,bat} <userName> <dbpassword>
Choose Admin > Configure > Web Users > Local Database.
Step 3
You see the list of users in the local database.
Select the user that you want to delete and click Delete to remove the old user.
Step 4

Starting, Restarting, and Stopping Services

To start, restart, or stop services using Fabric Manager Web Server, follow these steps:
Step 1 Choose Admin > Status.
You see a table of services and the status of each as shown in
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Admin
7-29.
7-35