Viewing The Pending Database - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

DPVM
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 28-6
Select commit from the drop-down menu to distribute these changes or abort to discard the changes.
Step 4
Note To disable DPVM, you must explicitly deactivate the currently active DPVM database.

Viewing the Pending Database

To view the pending database using Fabric Manager, follow these steps:
Expand Fabricxx> All VSANs and then select DPVM from the Logical Attributes pane.
Step 1
You see the DPVM configuration in the Information pane.
Click the CFS tab and set the Config View drop-down menu to pending (see
Step 2
Figure 28-7
Click Apply Changes.
Step 3
Click the Config Database tab.
Step 4
You see the pending database entries.
Cisco MDS 9000 Family CLI Configuration Guide
28-6
Config Action Drop-down Menu
CFS Tab with Master Switch Checked
Chapter 28 Creating Dynamic VSANs
Figure 28-7).
OL-16184-01, Cisco MDS SAN-OS Release 3.x