Disabling Intelligent Storage Services - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 55 Configuring SCSI Flow Services and Statistics
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 55-4
Click Create Row in the Information pane to create a SCSI flow or click a row in the FCWA table to
Step 2
modify an existing SCSI flow.
You see the FC Write Acceleration dialog box shown in
Figure 55-5
Select the initiator and target WWNs and VSAN IDs and check the WriteAcc check box to enable Fibre
Step 3
Channel write acceleration on this SCSI flow.
Optionally, enable SCSI flow statistics on this SCSI flow by checking the Enable Statistics check box.
Step 4
Optionally, change the BufCount value to set the number of 2K buffers used by the SCSI target.
Step 5
Click Create to create this SCSI flow.
Step 6

Disabling Intelligent Storage Services

To disable Intelligent Storage Services in Fabric Manager for an SSM and free up a group of ports that
used these services, follow these steps:
OL-16184-01, Cisco MDS SAN-OS Release 3.x
FCWA Tab
FC Write Acceleration Dialog Box
Figure 55-5.
Cisco MDS 9000 Family CLI Configuration Guide
SCSI Flow Services
55-5