Multiple Vsan Configuration - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 51 Configuring IP Services
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 51-3

Multiple VSAN Configuration

More than one VSAN can be used to segment the management network in multiple subnets. An active
interface must be present on the switch for the VSAN interface to be enabled.
To configure multiple VSANs, follow these steps:
Add the VSAN to the VSAN database on any switch in the fabric.
Step 1
Create a VSAN interface for the appropriate VSAN on any switch in the fabric.
Step 2
Assign an IP address on every VSAN interface on the same subnet as the corresponding VSAN.
Step 3
Define the multiple static routes on the Fibre Channel switches and the IP cloud (see
Step 4
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Overlay VSAN Configuration Example
Int vsan10 - 10.10.10.88
VSAN HR
Int vsan10 - 10.10.10.124
IP default gateway
10.10.10.34
VSAN 10
Int vsan10 - 10.10.10.35
Int vsan10 - 10.10.10.34
VSAN ENG
172.23.84.74
mgmt 0
172.23.84.86
NMS
IP cloud
ip route 10.10.10.0 255.255.255.0 172.23.93.74
Physical Fibre
Channel Fabric
Cisco MDS 9000 Family CLI Configuration Guide
Multiple VSAN Configuration
Figure 51-4).
51-7