HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 461

Chapter 23 Configuring PortChannels
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 23-9
Click Next.
Step 3
Select the ISLs.
Step 4
Figure 23-10
Step 5 Optionally, check the Dynamically form Port Channel Group from selected ISLs check box if you
want to dynamically create the PortChannel and make the ISL properties identical for the Admin, Trunk,
Speed, and VSAN attributes.
Click Next.
Step 6
If you chose to dynamically form a PortChannel from selected ISLs, you see the final PortChannel
Step 7
Wizard screen (see
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Select Switch Pairs
Figure 23-10 shows a list of the ISLs.
Select ISLs
Figure 23-11). Set the VSAN List, Trunk Mode, and Speed and proceed to
PortChannel Configuration
Cisco MDS 9000 Family CLI Configuration Guide
Step 11.
23-9