Backing Up And Restoring Zones; Renaming Zones, Zone Sets, And Aliases - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Zone Set Duplication
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Backing Up and Restoring Zones

To back up or restore the full zone configuration using Fabric Manager, follow these steps:
Choose Zone > Edit Local Full Zone Database.
Step 1
You see the Select VSAN dialog box.
Step 2 Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Choose File > Backup to back up the existing zone configuration to a workstation using TFTP, or choose
File > Restore to restore a saved zone configuration.
You see the Restore Zone Configuration dialog box shown in
Figure 30-29
You can edit this configuration before restoring it to the switch.
Step 4 Click Continue Restore, or click Close to close the dialog box without restoring.

Renaming Zones, Zone Sets, and Aliases

To rename a zone, zone set, or alias using Fabric Manager, follow these steps:
Choose Zone > Edit Local Full Zone Database.
Step 1
You see the Select VSAN dialog box.
Select a VSAN and click OK.
Step 2
You see the Edit Local Full Zone Database dialog box for the selected VSAN (see
Cisco MDS 9000 Family CLI Configuration Guide
30-30
Restore Zone Configuration Dialog Box
Chapter 30 Configuring and Managing Zones
Figure 30-29.
Figure
OL-16184-01, Cisco MDS SAN-OS Release 3.x
30-30).