HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 299

Chapter 13 Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the configuration for this feature based on the master switch (see
Modify the feature configuration. For example, right-click the name in the Master column and select
Step 8
Create Row to create a server for NTP.
Set the ID, and the Name or IP Address for the NTP server.
a.
Set the Mode radio button and optionally check the Preferred check box.
b.
Click Create to add the server.
c.
Figure 13-11
Click the Delete Row icon to delete a row.
Step 9
If you make any changes, the status automatically changes to Pending (see
Figure 13-12
Step 10 Click the Commit CFS Pending Changes icon to save the changes (see
Figure 13-13
The status changes to Running (see
Step 11
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Servers Tab
Status Change to Pending
Commit CFS Pending Changes
Figure 13-14).
Cisco MDS 9000 Family CLI Configuration Guide
CFS Example Using Fabric Manager
Figure 13-11).
Figure 13-12).
Figure 13-13).
13-17