Generating The Ssh Server Key Pair - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

SSH Services
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Generating the SSH Server Key Pair

To generate the SSH server key pair, follow these steps:
Expand Switches > Security and then select SSH and Telnet.
Step 1
You see the configuration shown in
Figure 39-10
Click Create Row.
Step 2
You see the SSH and Telnet Key Create dialog box shown in
Figure 39-11
Step 3 Check the switches you want to assign to this SSH key pair.
Step 4 Choose the key pair option type from the listed Protocols. The listed protocols are SSH1, SSH2(rsa), and
SSH2(dsa).
Step 5 Set the number of bits that will be used to generate the key pairs in the NumBits drop-down menu.
Step 6 Click Create to generate these keys or click Close to discard any unsaved changes.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
39-16
Figure 39-10
SSH and Telnet Configuration
Create SSH and Telnet Dialog Box
Chapter 39 Configuring Users and Common Roles
in the Information pane.
Figure 39-11.
OL-8007-10, Cisco MDS SAN-OS Release 3.x