About Zoning - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring and Managing Zones
Zoning enables you to set up access control between storage devices or user groups. If you have
administrator privileges in your fabric, you can create zones to increase network security and to prevent
data loss or corruption. Zoning is enforced by examining the source-destination ID field.
Advanced zoning capabilities specified in the FC-GS-4 and FC-SW-3 standards are provided. You can
use either the existing basic zoning capabilities or the advanced, standards-compliant zoning
capabilities.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•
•
Note Table 26-1 on page 26-4

About Zoning

Zoning has the following features:
•
OL-16184-01, Cisco MDS SAN-OS Release 3.x
About Zoning, page 30-1
Using the Quick Config Wizard, page 30-7
Zone Configuration, page 30-10
Zone Sets, page 30-15
Zone Set Distribution, page 30-25
Zone Set Duplication, page 30-28
Advanced Zone Attributes, page 30-32
Displaying Zone Information, page 30-39
Enhanced Zoning, page 30-40
Compacting the Zone Database for Downgrading, page 30-44
Default Settings, page 30-45
lists the differences between zones and VSANs.
A zone consists of multiple zone members.
Members in a zone can access each other; members in different zones cannot access each other.
–
If zoning is not activated, all devices are members of the default zone.
–
If zoning is activated, any device that is not in an active zone (a zone that is part of an active
–
zone set) is a member of the default zone.
30
C H A P T E R
Cisco MDS 9000 Family CLI Configuration Guide
30-1