Chapter 39
Configuring Users and Common Roles
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the Roles - Create dialog box in
Figure 39-2
Select the switches on which to configure a role.
Step 3
Enter the name of the role in the Name field.
Step 4
Enter the description of the role in the Description field.
Step 5
Optionally, check the Enable check box to enable the VSAN scope and enter the list of VSANs in the
Step 6
Scope field to which you want to restrict this role.
Click Create to create the role, or click Close to close the Roles - Create dialog box without creating
Step 7
the common role.
Note
Device Manager automatically creates six roles that are required for Device Manager to display a view
of a switch. These roles are: system, snmp, module, interface, hardware, and environment.
Deleting Common Roles
To delete a common role using Fabric Manager, follow these steps:
Step 1
Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Click
the Roles tab in the Information pane.
Step 2
Click the role you want to delete.
Step 3
Click Delete Row to delete the common role.
Step 4
Click Yes to confirm the deletion or No to cancel it.
About the VSAN Policy
Configuring the VSAN policy requires the ENTERPRISE_PKG license (see
Installing
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Create Roles Dialog Box
Licenses").
Figure
39-2.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Role-Based Authorization
Chapter 10, "Obtaining and
39-3