Flogi; Displaying Flogi Details - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Managing FLOGI, Name Server, FDMI, and RSCN
Databases
This chapter describes the fabric login database, the name server features, the Fabric-Device
Management Interface, and Registered State Change Notification (RSCN) information provided in the
Cisco MDS 9000 Family. It includes the following sections:
•
•
•
•
•
•
•

FLOGI

In a Fibre Channel fabric, each host or disk requires an FC ID. If the required device is displayed in the
FLOGI table, the fabric login is successful. Examine the FLOGI database on a switch that is directly
connected to the host HBA and connected ports. See the
and the

Displaying FLOGI Details

To verify that a storage device is in the fabric login (FLOGI) table using Fabric Manager, follow these
steps:
Expand Switches, expand Interfaces and then select FC Physical.
Step 1
You see the interface configuration in the Information pane.
Step 2 Click the FLOGI tab.
You see all end devices that are logged into the fabric (see
OL-16184-01, Cisco MDS SAN-OS Release 3.x
FLOGI, page 34-1
Displaying FLOGI Details, page 34-1
Name Server Proxy, page 34-2
FDMI, page 34-4
Displaying FDMI, page 34-4
RSCN, page 34-5
Default Settings, page 34-8
"Switch Interoperability" section on page
C H A P T E R
"Default Company ID list" section on page 37-7
37-8.
Figure 34-1).
Cisco MDS 9000 Family CLI Configuration Guide
34
34-1