Configuring Read-Only Zones; Displaying Zone Information - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 30 Configuring and Managing Zones
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Configuring Read-Only Zones

To configure read-only zones using Fabric Manager, follow these steps:
Choose Zone > Edit Local Full Zone Database.
Step 1
You see the Select VSAN dialog box.
Step 2 Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Click Zones in the left pane and click the Insert icon to add a zone.
You see the Create Zone Dialog Box as shown in
Figure 30-38
Check the Read Only check box to create a read-only zone.
Step 4
Click OK.
Step 5
Note To configure the read-only option for a default zone, see
on page

Displaying Zone Information

To view zone information and statistics using Fabric Manager, follow these steps:
Step 1 Expand a VSAN and select a zone set in the Logical Domains pane.
You see the zone configuration in the Information pane.
Choose the Read Only Violations, Statistics tab, or LUN Zoning Statistics tab to view statistics for
Step 2
the selected zone.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Create Zone Dialog Box
30-35.
Figure 30-38.
"Configuring the Default Zone Policy" section
Cisco MDS 9000 Family CLI Configuration Guide
Displaying Zone Information
30-39