Reloading Modules; Reloading A Switch - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 19 Managing Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 19-3
Module Status
Output
powered up
testing
initializing
failure
ok
power-denied
active
HA-standby
standby
To view the state of a module from Device Manager, choose Physical > Modules. The dialog box
displays the status of every module.

Reloading Modules

You can reload the entire switch, reset specific modules in the switch, or reload the image on specific
modules in the switch.
This section includes the following totopics:
•
•

Reloading a Switch

To reload a switch using Fabric Manager, follow these steps:
Do one of the following in the Logical Domains pane:
Step 1
•
•
•
Step 2 Expand Switches and select Hardware in the Physical Attributes pane.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Module States
Description
The hardware has electrical power. When the hardware is powered up, the
software begins booting.
The switching module has established connection with the supervisor
module and the switching module is performing bootup diagnostics.
The diagnostics have completed successfully and the configuration is being
downloaded.
The switch detects a switching module failure upon initialization and
automatically attempts to power-cycle the module three times. After the third
attempt it continues to display a failed state.
The switch is ready to be configured.
The switch detects insufficient power for a switching module to power up.
This module is the active supervisor module and the switch is ready to be
configured.
The HA switchover mechanism is enabled on the standby supervisor module
(see the "HA Switchover Characteristics" section on page
The warm switchover mechanism is enabled on the standby supervisor
module (see the
Reloading a Switch, page 19-5
Power Cycling Modules, page 19-6
Click SAN to display a list of all switches in the SAN.
Click one of the fabrics to display a list of switches for that fabric.
Click a VSAN to display a list of switches for that VSAN.
"HA Switchover Characteristics" section on page
Cisco MDS 9000 Family CLI Configuration Guide
Reloading Modules
17-2).
17-2).
19-5