HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 766

SNMP Trap and Inform Notifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 40-1
Choose Switches > Events > SNMP Traps to see the check boxes listed in this table.
Choosing Switches > Events > SNMP Traps enables both traps and informs, depending on how you
Note
configured notifications. See the
Table 40-1
MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-FCC-MIB
CISCO-DM-MIB
CISCO-NS-MIB
CISCO-FCS-MIB
CISCO-FDMI-MIB
CISCO-FSPF-MIB
CISCO-LICENSE-MGR-MIB
CISCO-IPSEC-SIGNALLING-MIB
CISCO-PSM-MIB
CISCO-RSCN-MIB
SNMPv2-MIB
VRRP-MIB, CISCO-IETF-VRRP-MIB
CISCO-ZS-MIB
The following notifications are enabled by default:
entity fru
•
license
•
link ietf-extended
•
All other notifications are disabled by default.
To enable individual notifications using Fabric Manager, follow these steps:
Expand Switches > Events and then select SNMP Traps in the Physical Attributes pane.
Step 1
You see the SNMP notification configuration in the Information pane.
Click the FC tab to enable Fibre Channel related notifications.
Step 2
Check each notification check box that you want to enable.
Step 3
Click the Other tab to enable other notifications.
Step 4
Cisco MDS 9000 Family CLI Configuration Guide
40-10
lists the Fabric Manager procedures that enable the notifications for Cisco MDS MIBs.
"Configuring SNMPv3 Notifications" section on page 40-9
Enabling SNMP Notifications
Fabric Manager Check boxes
Select the Other tab and check FRU Changes.
Select the Other tab and check FCC.
Select the FC tab and check Domain Mgr RCF.
Select the FC tab and check Name Server.
Select the Other tab and check FCS Rejects
Select the Other tab and check FDMI.
Select the FC tab and check FSPF Neighbor
Change.
Select the Other tab and check License Manager.
Select the Other tab and check IPSEC.
Select the Other tab and check Port Security.
Select the FC tab and check RSCN ILS, and RCSN
ELS.
Select the Other tab and check SNMP
AuthFailure.
Select the Other tab and check VRRP.
Select the FC tab and check Zone Rejects, Zone
Merge Failures, Zone Merge Successes, Zone
Default Policy Change, and Zone Unsuppd Mode.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 40 Configuring SNMP
.