Configuring NPV
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 21-17
Step 6
Select a VSAN as shown in
Figure 21-18
From the drop-down list select a VSAN or enter a VSAN ID to specify the VSAN. All selected NPV
devices and NPIV core switches are added to the specified VSAN. All ports on the selected NPV devices
and associated ports on the NPIV core switches are added to the VSAN.
The VSAN configuration is applied in the final step.
Complete the NPV Setup. All the configurations captured from previous steps are shown in the
Step 7
respective panes in this step for confirmation as shown in
Cisco MDS 9000 Family CLI Configuration Guide
21-16
Message Alert to Connect Port Pair.
Figure
21-18.
Selecting A VSAN
Chapter 21
Configuring N Port Virtualization
Figure
21-19.
OL-16184-01, Cisco MDS SAN-OS Release 3.x