HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 1047

Chapter 50 Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note
a. In Fabric Manager, choose Zones > Edit Local Full Zone Database.
Select VSAN 1 from the VSAN drop-down menu in the Edit Local Full Zone Database dialog box.
b.
Select the Zones folder in the left navigation pane and click Insert.
c.
Set the Zone Name field to iscsi-zone-1 and click OK.
d.
Select the iscsi-zone-1 folder in the left navigation pane and click Insert.
e.
Set the ZoneBy radio button toWWN.
f.
Set the Port WWN to the pWWN for the Fibre Channel target (that is, 21:00:00:20:37:6f:fd:97) and
g.
click Add.
Set the ZoneBy radio button to iSCSI IP Address/Subnet.
h.
Set the IP Address/Mask field to the IP Address for Host 1 iSCSI initiator (10.11.1.10) and click
i.
Add.
Create a zone named iscsi-zone-2 with host 2 and two Fibre Channel targets in it.
Step 9
Note
In Fabric Manager, choose Zones > Edit Local Full Zone Database from the main menu.
a.
Select VSAN 2 from the VSAN drop-down menu in the Edit Local Full Zone Database dialog box.
b.
Select the Zones folder in the left navigation pane and click Insert.
c.
Set the Zone Name field to iscsi-zone-2 and click OK.
d.
Select the iscsi-zone-2 folder in the left navigation pane and click Insert.
e.
f. Set the ZoneBy radio button toWWN.
g. Set the Port WWN to the pWWN for one of the Fibre Channel targets (for example,
21:00:00:20:37:6f:fe:5). and click Add.
Set the Port WWN to the pWWN for another of the Fibre Channel targets (for example,
h.
21:00:00:20:37:a6:a6:5d). and click Add.
Set the ZoneBy radio button to iSCSI name.
i.
Set the Port Name field to the symbolic name for host 2 (iqn.1987-05.com.cisco:01.25589167f74c)
j.
and click Add.
Create a zone set, add the two zones as members, and activate the zone set.
Step 10
Note
In Fabric Manager, choose Zones > Edit Local Full Zone Database.
a.
b. Select VSAN 1 from the VSAN drop-down menu in the Edit Local Full Zone Database dialog box.
c. Select the Zoneset folder in the left navigation pane and click Insert.
d. Set the Zoneset Name to zonset-iscsi and click OK.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Use the IP address of the host in zone membership configuration because the iSCSI interface is
configured to identify all hosts based on IP address.
Use the symbolic node name of the iSCSI host in zone membership configuration because the
iSCSI interface is configured to identify all hosts based on node name.
iSCSI interface is configured to identify all hosts based on node name.
iSCSI Authentication Setup Guidelines and Scenarios
Cisco MDS 9000 Family CLI Configuration Guide
50-61