Migrating A Non-Mds Database; Clearing The Zone Server Database; Advanced Zone Attributes - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Advanced Zone Attributes

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 30-31
Step 4 Change the name for the cloned entry.
Click OK to save the new clone.
Step 5
The cloned database now appears along with the original database.

Migrating a Non-MDS Database

To use the Zone Migration Wizard to migrate a non-MDS database using Fabric Manager, follow these
steps:
Step 1 Choose Zone > Migrate Non-MDS Database.
You see the Zone Migration Wizard.
Step 2 Follow the prompts in the wizard to migrate the database.

Clearing the Zone Server Database

You can clear all configured information in the zone server database for the specified VSAN.To clear the
zone server database, refer to the Cisco MDS 9000 Family CLI Configuration Guide.
Note Clearing a zone set only erases the full zone database, not the active zone database.
Note After clearing the zone server database, you must explicitly copy the running configuration to the
startup configuration to ensure that the running configuration is used when the switch reboots.
Advanced Zone Attributes
This section describes advanced zone attributes and includes the following topics:
•
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
30-32
Clone Zoneset Dialog Box
About Zone-Based Traffic Priority, page 30-33
Configuring Zone-Based Traffic Priority, page 30-33
Configuring Default Zone QoS Priority Attributes, page 30-34
Configuring the Default Zone Policy, page 30-35
Chapter 30 Configuring and Managing Zones
OL-16184-01, Cisco MDS SAN-OS Release 3.x