HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 525

Chapter 27 SAN Device Virtualization
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 27-5
Virtualization
To configure a virtual target and commit it to the fabric configuration using Fabric Manager, follow these
steps:
Step 1 Expand SAN in the Logical Domains pane. Then expand the fabric in which your VSAN resides.
Step 2 Expand the VSAN in which you wish to create the virtual target and select SDV. You see the switches
in the VSAN that you selected listed in the Information pane.
Step 3 In the Control tab, select enable from the dropdown menu in the Command column to enable SAN
device virtualization for a particular switch in the VSAN(see
Figure 27-6
Step 4 Click the Apply Changes icon to commit the configuration change.
Step 5 Click the CFS tab. Confirm that the SAN device virtualization feature is enabled for the switch.
Click the Virtual Devices tab and then click the Create Row icon.
Step 6
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Creating a Virtual Device
i1pwwn
SAN Device
vtpwwn
vt1
VT
Enabling SAN Device Virtualization
i2pwwn i3pwwn
i1 i2 i3
Virtual
Device
t1pwwn t2pwwn
t1 t2
Primary Secondary
Cisco MDS 9000 Family CLI Configuration Guide
Configuring SDV
Figure 27-6).
27-5