Defining Dhcp Ip Interface Parameters; Ip Interface Parameters Cli Commands - Dell PowerConnect 5324 User Manual

Defining IP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
IP Interface Parameters page.
Table 6-27. IP Interface Parameters CLI Commands
CLI Command
ip address ip-address {mask |
prefix-length}
no ip address [ip-address]
show ip interface [ethernet
interface-number | vlan vlan-
id | port-channel number]
The following is an example of the CLI commands:
Console (config)# interface vlan 1
Console (config-if)# ip address 131.108.1.27 255.255.255.0
Console (config-if)# no ip address 131.108.1.27
Console (config-if)# exitconsole# show ip interface vlan 1
Output

Defining DHCP IP Interface Parameters

console# show ip interface vlan 1
Output
Description
Sets an IP address.
Removes an IP address
Displays the usability status of interfaces
configured for IP .
Configuring System Information
123