Using A Frame Pattern For The Outline - Brother 882-W20/W22 Operation Manual

VARIOUS EMBROIDERING FUNCTIONS
n
With the machine threaded using the thread
for the outline from step
(APPLIQUE).
a Outline of appliqué piece
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern, and then
clean off the glue.
o
After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
p
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
q
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
r
Dry the appliqué piece, and then iron it if
necessary.
Note
• Do not apply a strong force when ironing,
otherwise the stitching may be damaged.
294
■ Using a Frame Pattern for the
l
, sew the outline
a
b
Outline
Using a frame pattern, the desired shape can be
added as the outline of the appliqué. To select the
desired frame, see "Selecting Frame Patterns" on
page 219.
Perform the operations described in steps
a d
through of "Creating an Appliqué
Piece" on page 291.
Select the desired frame shape and pattern,
and add it to the appliqué pattern.