Changing The Size; Changing The Length (For 7Mm Satin Stitch Patterns Only); Creating A Vertical Mirror Image; Creating A Horizontal Mirror Image - Brother 882-D30 Operation Manual

EDITING STITCH PATTERNS

Changing the Size

Select a stitch pattern, then press
the size of the stitch pattern. The stitch pattern will
be sewn in the size highlighted on the key.
Memo
• If you continue entering stitch patterns after
changing the size, those patterns will also
be sewn in that size.
• You cannot change the size of combined
stitch patterns once the stitch pattern is
entered.
Actual Stitch Pattern Size
* The size differs depending on the fabric and threads.
Changing the Length (for 7mm
Satin Stitch Patterns Only)
When 7mm satin stitch patterns are selected, press
to choose from 5 automatic length settings,
without changing the stitch zigzag width or stitch
length settings.
S-86

Creating a Vertical Mirror Image

To create a vertical mirror image, select a stitch
to change
pattern then press
Creating a Horizontal Mirror
Image
To create a horizontal mirror image, select a stitch
pattern then press

Sewing a Pattern Continuously

Press
stitch sewing.
.
.
to select continuous sewing or single