Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 1353

Chapter 66 Troubleshooting Your Fabric
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To locate switches that are not included in the currently discovered fabric using Fabric Manager, follow
these steps:
Choose File > Locate Switches and Devices.
Step 1
You see the Locate Switches dialog box.
In the Comma Separated Subnets field, enter a range of specific addresses belonging to a specific subnet
Step 2
to limit the research for the switches. To look for a Cisco MDS 9000 switch belonging to subnet
192.168.199.0, use the following string:
192.168.100.[1-254]
Multiple ranges can be specified, separated by commas. For example, to look for all the devices in the
two subnets 192.168.199.0 and 192.169.100.0, use the following string:
192.168.100.[1-254], 192.169.100.[1-254]
Enter the appropriate read community string in the Read Community field.
Step 3
The default value for this string is public.
Click Display Cisco MDS 9000 Only to display only the Cisco MDS 9000 Family switches in your
Step 4
network fabric.
Click Search to discover switches and devices in your network fabric.
Step 5
You see the results of the discovery in the Locate Switches window. (See
Figure 66-10
Note
OL-17256-03, Cisco MDS NX-OS Release 4.x
Search Results for Switches and Devices
The number in the lower left corner of the screen increments as the device locator attempts to
discover the devices in your network fabric. When the discovery process is complete, the number
indicates the number of rows displayed.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Locating Other Switches
Figure 66-10.)
66-13