Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 1380

Other
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 67-1
Fabric Manager Color
Green Square with Mode (e.g., F, T, TE, U/I for
FICON)
Orange Square with Mode
Orange Cross
Brown Square
Light Gray Square
Red Cross
Red Square
No Square or Black Square
Table 67-2
Tooltip
adminDown
bitErrRTThresExceeded
bundleMisCfg
channelAdminDown
channelConfigurationInProgress
channelOperSuspended
deniedDueToPortBinding
domainAddrAssignFailureIsolation
domainInvalidRCFReceived
domainManagerDisabled
domainMaxReTxFailure
domainOtherSideEportIsolation
domainOverlapIsolation
elpFailureClassFParamErr
Cisco MDS 9000 Family Fabric Manager Configuration Guide
67-14
Fabric Manager and Device Manager Color Definitions (continued)
Device Manager Tooltip Definitions
Chapter 67
Definition
Port up.
Trunk incomplete.
Ols or Nos received.
Port is administratively down.
Port is not manageable.
HardwareFailure/LoopbackDiagFailure/LinkFail
ure
Any other kind of configuration failure.
Port not yet configured.
Definition
The port is administratively down.
Bit error rate too high.
Misconfiguration in PortChannel membership
detected.
This port is a member of a PortChannel and that
PortChannel is administratively down.
This port is undergoing a PortChannel
configuration.
This port is a member of a PortChannel and its
operational parameters are incompatible with the
PortChannel parameters.
Suspended due to port binding.
The elected principal switch is not capable of
performing domain address manager functions so
no Nx_port traffic can be forwarded across
switches, hence all Interconnect_Ports in the
switch are isolated.
Invalid RCF received.
Domain manager is disabled.
Domain manager failure after maximum retries.
The peer E port is isolated.
There is a overlap in domains while attempting to
connect two existing fabrics.
Isolated for ELP failure due to class F parameter
error.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Management Software FAQ