Using the Performance Monitoring Screen
Figure 8-1
8.1.1 Viewing PMs
Before you view PMs, be sure you have created the appropriate circuits and provisioned the card
according to your specifications. For information about circuit creation and card provisioning, see the
Cisco ONS 15454 Installation and Operations Guide.
Procedure: View PMs
Open the electrical or optical card of choice. Double-click the card's graphic in the main (node) view or
Step 1
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
From the card view, click the Performance tab.
Step 2
View the PM parameter names that appear on the left portion of the screen in the Param column. The
Step 3
parameter numbers appear on the right portion of the screen in the Curr (current), and Prev (previous)
columns.
8.1.2 Changing the Screen Intervals
Changing the screen view allows you to view PMs in 15-minute intervals or 24-hour periods.
shows the time interval buttons on the Performance Monitoring screen.
Cisco ONS 15454 Installation and Operations Guide
8-2
Viewing performance monitoring information
Performance tab
Card view
Chapter 8
Performance Monitoring
Figure 8-2
November 2001