Enable Ipif; Disable Ipif - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin#delete ipif newone
Command: delete ipif newone
Success.
DWS-3160-24PC:admin#

12-16 enable ipif

Description
This commands is used to enable the IP interface.
Format
enable ipif [<ipif_name 12> | all]
Parameters
ipif_name - Specifies the name of the IP interface.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
all – Specifies that all the IP interfaces will be enabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable an IP interface:
DWS-3160-24PC:admin#enable ipif newone
Command: enable ipif newone
Success.
DWS-3160-24PC:admin#

12-17 disable ipif

Description
This command is used to disable an IP interface.
Format
disable ipif [<ipif_name 12> | all]
Parameters
ipif_name - Specifies the name of the IP interface.
146