DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 16 Command Logging
enable command logging
disable command logging
show command logging
16-1
enable command logging
Description
This command is used to enable the command logging function. When the Switch is under the
booting procedure, all configuration commands will not be logged. When the user accesses the
Switch under the AAA authentication mode, the username should not changed if user uses "enable
admin" command to replace its privilege.
Format
enable command logging
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the command logging function:
DWS-3160-24PC:admin# enable command logging
Command: enable command logging
Success.
DWS-3160-24PC:admin#
16-2
disable command logging
Description
This command is used to disable the command logging function.
Format
disable command logging
Command List
194