Show Cfm Fault - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
MAC Address
MEP State
CCM State
PDU Priority
Fault Alarm
Alarm Time
Alarm Reset Time
Highest Fault
AIS State
AIS Period
AIS Client Level
AIS Status
LCK State
LCK Period
LCK Client Level
LCK Status
Out-of-Sequence CCMs: 0 received
Cross-connect CCMs
Error CCMs
Normal CCMs
Port Status CCMs
If Status CCMs
CCMs transmitted
In-order LBRs
Out-of-order LBRs
Next LTM Trans ID
Unexpected LTRs
LBMs Transmitted
AIS PDUs
AIS PDUs Transmitted: 0
LCK PDUs
LCK PDUs Transmitted: 0
DWS-3160-24PC:admin#

19-15 show cfm fault

Description
This command is used to display all the fault conditions detected by the MEPs contained in the
specified MA or MD. This display provides the overview of the fault status by MEPs.
Format
show cfm fault {md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> |
ma_index <uint 1-4294967295>]}}
Parameters
md - (Optional) Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name used here. This name can be up to 22
characters long.
: 00-11-22-33-45-77
: Disabled
: Disabled
: 7
: Disabled
: 250 centisecond((1/100)s)
: 1000 centisecond((1/100)s)
: None
: Disabled
: 1 Second
: Invalid
: Not Detected
: Disabled
: 1 Second
: Invalid
: Not Detected
: 0 received
: 0 received
: 0 received
: 0 received
: 0 received
: 0
: 0 received
: 0 received
: 0
: 0 received
: 0
: 0 received
: 0 received
224