D-Link DWS-3160-24TC Cli Reference Manual page 328

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
30-10 move
Description
This command is used to move a file around the file system.
NOTE: When a file is moved, it can be renames at the same time too.
Format
move <pathname 64> <pathname 64>
Parameters
<pathname 64> - Specifies the file to be moved. The path name can be specified either as a full
path name or partial name. Specified either as a full path name or partial name. For partial
path name, it indicates the file is in the current directory. This name can be up to 64
characters long.
<pathname 64> - Specifies the new path where the file will be moved. The path name can be.
For partial path name, it indicates the file is in the current directory. This name can be up to 64
characters long.
Restrictions
Only Administrators and Operators can issue this command.
Example
To move a file from one location to another location:
DWS-3160-24PC:admin# move c:/log.txt c:/log1.txt
Command: move c:/log.txt c:/log1.txt
Success.
DWS-3160-24PC:admin#
30-11 copy
Description
This command is used to copy a file to another file in the file system.
Format
copy <pathname 64> <pathname 64>
Parameters
<pathname 64> - Specifies the file to be copied. The path name can be specified either as a full
path name or partial name. For partial path name, it indicates the file is in the current directory.
324